Accessories for AC pro

Adapterbox ADCA100

The ADCA100 is an aluminum adapter box that has been developed for connecting the symmetrical ADC1xxMLN Analog Measurement Cards to up to 24 single-ended voltage output or the common 2…20mA current supplied sensors better known by their registered trademarks ICP®, DeltaTron®, Isotron® and Piezotron®. It holds 24 (two rows of 12) BNC connectors and has four switches on the backside each switching 6 of the 24 AC inputs between ±10V and 2V to 22V input-voltage with 3mA sensor supply. Configuration and results of the factory-calibration can be stored in a non-volatile memory and used for compensation while measuring. Disturbance tolerant transmission from the MDR68 connector to the Analog Measurement Card is achieved when using the symmetrical mccabAR1xx cable.

frontside- 24 sensors in groups of six

backside- four swtiches

PDF for download:
Datasheet Adapterbox ADCA100

• Multi channel analog interface SyMBus24 to AD Card
  Disturbance tolerant symmetrical transmission
  MDR68 front connector for reliable repetitive plugging
• 24 channel analog interface 24BNC to sensors
  * 24 widely accepted BNC front connectors
  • ±10V input-voltage range (current sources off)
  • 2V to 22V with current sources switched on
  • 10kΩ input resistance
  • 2Hz to 80kHz frequency response (with ADC100MLN card)
* 4x switchable 6x 3mA center contact current supply
• Non-volatile calibration and configuration memory
• Onboard voltage monitoring
• Green activity LED
• Low power consumption (5W typically)
• Aluminum box can be placed underneath the mcdRec721x and locks its feet